Skip to main content

Posts

Showing posts with the label efficiency

Does it cost more to spray soluble fertilizer on our golf course?

I often receive criticism from people who say that the fertilizer savings I have found from using soluble fertilizer sources and the MLSN come at a cost of higher sprayer usage. I normally tell them "nu uh" but maybe it would be better if I looked into it a bit more closely. We used to spend upwards of $30,000 on fertilizer for our golf course. In the past few years we have averaged $6000. This is a savings of $24,000 per year on fertilizer by spraying soluble source fertilizer as required by the MLSN and my growth rate targets. Our annual cost of ownership for our Toro Workman Multipro Spray System on Workman HDXD 4wd chassis is $22,122. This includes everything from the cost of the lease, parts, equipment maintenance labor, fuel and labor to operate the machine for the first 5 years of its service life. Right away we can see that this strategy saves us about $2000 a year vs using granular fertilizers and other nutrient guidelines. We aren't even taking into account the ...

How rolling can help fight climate change

OK that title is a bit much but bare with me. It's no secret I'm a fan of rolling. It has a ton of benefits from faster and smoother greens to disease suppression. Ever since I got my first roller back in 2010 we have been rolling daily and cutting every other day or some version of this. Basically we roll the greens 2 times for every mow without significant impacts on playability of the greens. If anything this schedule of greens maintenance results in more consistent playing conditions . The benefits of this are obvious when it comes to mower maintenance. If you use a mower half as much it will require about half the maintenance and last about twice as long. For me it has made it possible for us to use our only triplex mower for both greens and tees . We only need one mower for 2 jobs. One mower, Two sets of cutting units This year we looked at fuel use savings. Aside from the cost of fuel, we are also concerned with the use of fossil fuels and ways we can reduce our reliance...

One mower, 2 jobs

One sweet mower, two sets of heads Two years ago I put together a plan to replace our aging maintenance equipment with new leased modern equipment. At the time, we were spending almost as much as our current lease costs each year on parts alone! There was also the time I spent fixing the equipment and the time my staff were not working efficiently as their mowers seemed to be broken more often than not. This was a great opportunity for us to both modernize our fleet, but also build in some equipment inefficiencies specific to our course and operational needs. In the past we had 2 mowers set aside for mowing tees and greens. Each mower was basically the same but the cutting units were set at different heights of cut. This worked great but when I was looking at getting new equipment on lease it was just too costly to do this with new equipment. What I decided to do was get one really nice mower that could do it all. We needed a mower that was all wheel drive, was versatile on all types o...

Making Digital Technology Work For You on the Golf Course

Digital technology is slowly creeping into a golf course maintenance operation near you whether you like it or not.  As the younger more tech-savvy generation move up the ranks they bring with them new ways to use the digital technology to make their operations better. Being one of the early adopters, I have noticed a lot of good examples and a lot of bad examples of how superintendents have implemented these systems on the golf course. I want to share with you some of the lessons and tricks I have learned to make a few of the most common uses of digital planning and record keeping actually improve your operation. Digital Job Board The digital job board is a trend that has recently taken off with golf course maintenance operations. At first is was just the high end clubs that were doing this but the low budget operations quickly caught on the benefits that a digital job board can offer. At first they might seem excessive for small mom and pop operations but they are in fact even mo...

Equipment Use and Labor Efficiency 2014

For the past few years I have been keeping very detailed records of most parts of my operation. The reason for these records are to analyze what we have done, and come up with solutions for improvement. Currently I have employees fill out a Google form after each time they operate a mower on the course. I collect the following data: operator name equipment name area of course which holes? hour meter reading amount of grass collected when cutting greens This gives me a ton of info that I can analyze to really see what is happening out there on my course. I can even compare employees to each other to see who is more efficient at each job. This combined with each person's wage gives me a very good idea of what the actual cost of each mowing task really is. Even though I am the most efficient operator at my course, my higher salary make it much more expensive to the club for me to operate a mower. Equipment Use Efficiency One of the biggest costs for golf course maintenance is mowing ...

How Much Nitrogen?

How do you decide how much nitrogen to apply and when? I have always used research showing the relationship between disease pressure and nitrogen rates as the basis for my fertility program. In general, nitrogen rates higher than 2kg/100m2 per growing season resulted in more fusarium. Fusarium is my number one pest so obviously I plan most of my agronomic practices around prevention of this fungal disease. Once I had the total rates I would basically just divide the total by the number of growing months I had in my climate or 8 giving me a number of around 0.25kgN/100m2 per month. I would then tweak these amounts based on the following growth model for cool season turf. http://www.ipm.ucdavis.edu/TOOLS/TURF/ESTABLISH/seasongrth.html For the most part this growth model is exactly how cool season turf performs in most cool season climates. The only problem is that being on the West Coast of Canada I maintain turf in an extreme range of this climate. My climate is extremely not extreme o...

How Wall-toWall Irrigation is Killing Golf!

Here is one point of view regarding irrigation and minimalism. I don't necessarily agree with it 100% but it's an interesting concept either way. When in-ground irrigation systems were first used on golf courses a single irrigation line running down the center of the fairways was the norm. This was due to the fact that the heads usually had to be manually connected and there just wasn't enough time or money to water everything. As technology progressed and budgets increased multi-row systems became the norm. Along with these multi-row or wall-to-wall systems came the ability to keep all of the fairways and rough green year-round. So naturally the design of courses changed to include thick dense rough all through the course. If we had the ability to do it then why not? Single row systems keep it green down the middle where it should be! Courses that were originally designed with single row irrigation systems were often upgraded to multi-row systems so that lush green conditi...

Keeping it Rough

A few years ago Pinehurst Resorts began a "restoration" of the No. 2 course. The aim of the restoration was to return the course back to the way it was originally meant to be played. Here is a great video showing what course architects Bill Coore and Ben Crenshaw have done to the course during this restoration. The neat thing about this restoration is that they are moving more to a style of golf that Pender Harbour offers. We have only ever had a single row irrigation system and therefore our rough always burns out in the summer months. The rough transitions from thick dense golf ball eating grass into a sparse bumpy arid mess. Although the dense green turf might be seen as the most desirable playing surface they both offer the same purpose to the game of golf. They are both surfaces that are less desirable than the fairways. The dense rough that our course features in the winter months is not as easy to hit a golf ball out of as the fairways and is an appropriate penalty for...

New Bridge on 5

Finished Product Last week we installed a new deck on the bridge between 5 green and 6 tee. This bridge is an old tractor trailer and had the original wood deck on it with a newer layer of wood that was added on top. During construction we found the insurance papers for this bridge and it turns out that it was delivered in 2001. removal of the old rotten decking Four out of seven bridges on the course are made from old tractor trailers, the newest was installed last year on hole 7. These trailers make great bridges as they are cheap, strong, and can be wheeled directly to the site. Once on site we flip them over and cut off the wheels and support struts then lift it into place with a crane. Old deck half removed This year we used a high powered nail gun to nail the wooden stringers to the steel frame. This saved us almost 2 days of work. We expect the new deck to last at least 10 years if not more. Cutting old nails off of frame   Adding decking after stringers were attached

Take the Guesswork out of Mowing Frequency

Lately there has been a lot of talk about sustainability in golf and reducing our reliance on chemicals.  For the most part if we can reduce or manage the stresses that are affecting our turf we can manage the turf pests that have the potential to kill the turf. How often do we need to cut our greens in the winter? One of the most common stresses that we as turf managers force upon our putting greens is intensive mowing. Many superintendents mow their greens once or twice a day in the summertime to keep the putting greens consistent and smooth.  In the summer this is often sustainable as the turf is growing and usually quite healthy.  In the shoulder seasons as well as winter we often have to reduce our mowing frequency to match the changing growth rates of the turf.  We have to take special care not to cut the turf too often or not enough. Cutting too much causes extra stress and cutting not enough will increase the chance of scalping unless the heigh...

Mower Efficiency Comparison

So here are some more numbers and graphs.  This week I have been analysing all of the data that I have collected this past year to try and make some meaningful sense out of it.  There are many ways to compare one course to another but by simply using a $ figure doesn't always work.  Some courses are simply more expensive to maintain, even with cost-cutting, sustainable practices.  Labour is usually the biggest part of any golf course maintenance budget so it makes sense to see how efficient you are for particular tasks. I have put together some data that shows how efficient our course is to mow.  To measure how efficient a particular mower is you need to know how long it takes to mow a specific area and also how big that area is.  You could also add in the costs of maintaining the mower to get a real good set of statistics.  Sadly my records just aren't complete enough for that to happen this year. It is a real challenge keeping track of everything whe...